Sliding Gate Opener 1000kg GA1000AC

1. GA600AC Sliding Gate Automation Kit is suitable for powering the opening and closing motion of gates up to 600kg in weight, up to a length of 8m.
2. Gate motion is achieved by the rotating output gear of the gate opener driving the gear rack (sold separately) fitted to the moving gate.
3. The gate opener requires you to press the remote control once to open, and once again to close. This is a safety feature to ensure safe operation.
4. The opener must be fitted within private property, never externally to a property's boundary.

The GA600AC sliding gate opener set can provide driving force for the opening and closing motion of the sliding door, with a maximum gate weight of up to 600 kilograms and a gate length of up to 8 meters.

VR1: Stall Force Mode: When Stall Force Mode is enabled (Dip switch 5 is at OFF position), the gate opener will detect obstacles and impacts to the gate. If this is during opening, the gate will stop, if this is during closing the gate will stop, and then re-open. Rotate VR1 clockwise to increase the stall force, anti-clockwise to decrease.
VR2: Brake Force Adjustment

VR3: Slow Stop Width Adjustment
This switch controls how many seconds the gate opener operates at maximum speed. Rotate VR3 clockwise to increase, rotate counter-clockwise to reduce.
VR4: Motor Output Force Adjustment

Rotate clockwise to increase, counter-clockwise to decrease.

Allow users to control the opening and closing of the door through an external push-button.